Product Description
Covering the full 5000-6000MHz spectrum—including UNII-1/2/3 bands, Wi-Fi 6/6E channels, 5G NR-U frequencies, UAV video links, and point-to-point microwave backhaul—this 5000-6000MHz 50W GaN Broadband Power Amplifier delivers 47dBm (50W) of clean output power with 40dB gain. Unlike standard amplifiers, it features a built-in circulator that protects the RF stage from reflected power caused by antenna mismatch or high VSWR—dramatically improving reliability in real-world deployments. Leveraging advanced GaN (Gallium Nitride) technology, it operates on a 28V DC supply with just 3.8A current draw at full output. Housed in a rugged 132 × 53 × 17 mm aluminum enclosure with SMA-K connectors and built-in power control, it delivers the wideband flexibility and ruggedness required for the most demanding 5GHz wireless applications.
Typical Applications
- Wi-Fi 6/6E Infrastructure: Amplify access point signals for enterprise and public network coverage
- Point-to-Point Microwave Backhaul: Boost wireless links for telecom and enterprise connectivity
- UAV Video & Data Links: Enhance 5GHz downlink range for professional drone operations
- WISP & Point-to-Multipoint Networks: Strengthen subscriber connections in wireless ISP deployments
- Radar & Sensing Systems: High-power RF front-end for detection and measurement applications
- Test & Measurement / Amateur Radio: Wideband amplification for 5cm band and lab field validation
Technical Specifications
|
Parameter |
Value |
|
Frequency Range |
5000 – 6000 MHz |
|
Output Power |
47 dBm (50W) |
|
Gain (S21) |
40 dB ± 1 dB |
|
Input Return Loss (S11) |
≤ -15 dB |
|
RF Input Power Range |
-13 ~ 10 dBm |
|
Operating Voltage |
28 V DC |
|
Current Consumption |
3.8 A @ 28V (at 47dBm output) |
|
Efficiency |
45% @ 47dBm |
|
Operating Temperature |
-30°C ~ +85°C |
|
Storage Temperature |
-40°C ~ +150°C |
|
Operating Humidity |
< 95% RH |
|
RF Connectors |
Input: SMA-K; Output: SMA-K |
|
DC Connector |
AWG18 20cm Red/Black wire leads |
|
Power Control |
3-28V 20cm Red wire (output adjustment) |
|
Shell Material |
Aluminum |
|
Dimensions |
132 × 53 × 17 mm |
|
Net Weight |
210 g |
Key Advantages
With 50W (47dBm) of clean GaN-powered output across the entire 5000-6000MHz band, this amplifier delivers 6-10× the effective range of standard 1W transmitters, covering Wi-Fi 6/6E, 5G NR-U, point-to-point backhaul, and UAV video links in a single wideband solution. Its built-in circulator provides critical protection against reflected power—allowing stable operation even with imperfect antennas, high-VSWR conditions, or in field environments where reliability cannot be compromised. The 40dB gain ensures consistent, predictable linearity even from low-power exciters, while the 3.8A current draw keeps power consumption efficient for both fixed and portable deployments.
Built-in remote power control via the 3-28V red wire allows dynamic output adjustment—ideal for real-time power management in Wi-Fi networks, WISP infrastructure, or drone ground stations. The 28V operating voltage ensures compatibility with 6S LiPo batteries, vehicle electrical systems, and regulated power supplies, while SMA-K connectors enable plug-and-play integration with existing RF chains. The 132 × 53 × 17 mm aluminum enclosure provides additional thermal mass and space for the integrated circulator, ensuring long-term durability under continuous high-power operation.
Precision-tuned for the 5000-6000MHz spectrum, this amplifier covers critical frequencies used by Wi-Fi 6/6E (UNII-1/2/3), point-to-point microwave links, UAV video transmission, and radar systems. Whether deployed in enterprise networks, wireless ISP towers, or drone ground stations, it delivers the wideband flexibility, circulator-protected reliability, and dependable power that the most demanding 5GHz applications require.
What's in the Box
- 1 × 5000-6000MHz 50W GaN Broadband Power Amplifier with Built-in Circulator