Product Description
Covering the full 6000-7200MHz spectrum—including Wi-Fi 6E/7 channels, 6GHz UNII-5/6/7/8 bands, next-generation FPV video downlinks, point-to-point microwave links, and emerging 7.2GHz systems—this 6000-7200MHz 40W GaN Broadband Power Amplifier delivers 46dBm (40W) of clean output power with 40dB gain. Unlike standard amplifiers, it features a built-in circulator that protects the RF stage from reflected power caused by antenna mismatch or high VSWR—dramatically improving reliability in real-world deployments. Leveraging advanced GaN (Gallium Nitride) technology, it operates on a 28V DC supply with just 3.2A current draw at full output. Housed in a rugged 132 × 53 × 17 mm aluminum enclosure with SMA-K connectors and built-in power control, it delivers the wideband flexibility and ruggedness required for demanding 6GHz wireless applications.
Typical Applications
- Wi-Fi 6E/7 Infrastructure: Amplify access point signals for enterprise and public network coverage
- 6GHz FPV & UAV Video Downlinks: High-power video transmission for long-range drone operations
- Point-to-Point Microwave Links: Boost wireless backhaul for telecom and enterprise connectivity
- Radar & Sensing Systems: High-power RF front-end for detection and measurement applications
- Amateur Radio & Experimental: Wideband amplification for licensed 6GHz and emerging 7.2GHz operations
- Emerging 7.2GHz Wireless Systems: Future-proof amplification for next-generation applications
Technical Specifications
|
Parameter |
Value |
|
Frequency Range |
6000 – 7200 MHz |
|
Output Power |
46 dBm (40W) |
|
Gain (S21) |
40 dB ± 1 dB |
|
Input Return Loss (S11) |
≤ -15 dB |
|
RF Input Power Range |
-13 ~ 10 dBm |
|
Operating Voltage |
28 V DC |
|
Current Consumption |
3.2 A @ 28V (at 46dBm output) |
|
Efficiency |
45% @ 46dBm |
|
Operating Temperature |
-30°C ~ +85°C |
|
Storage Temperature |
-40°C ~ +150°C |
|
Operating Humidity |
< 95% RH |
|
RF Connectors |
Input: SMA-K; Output: SMA-K |
|
DC Connector |
AWG18 20cm Red/Black wire leads |
|
Power Control |
3-28V 20cm Red wire (output adjustment) |
|
Shell Material |
Aluminum |
|
Dimensions |
132 × 53 × 17 mm |
|
Net Weight |
210 g |
Key Advantages
With 40W (46dBm) of clean GaN-powered output across the entire 6000-7200MHz band, this amplifier delivers 6-10× the effective range of standard 1W transmitters, covering Wi-Fi 6E/7, 6GHz FPV video, point-to-point backhaul, and emerging 7.2GHz systems in a single wideband solution. Its built-in circulator provides critical protection against reflected power—allowing stable operation even with imperfect antennas, high-VSWR conditions, or in field environments where reliability cannot be compromised. The 40dB gain ensures consistent, predictable linearity even from low-power exciters, while the 3.2A current draw keeps power consumption efficient for both fixed and portable deployments.
Built-in remote power control via the 3-28V red wire allows dynamic output adjustment—ideal for real-time power management in Wi-Fi networks, drone ground stations, or emerging 7.2GHz deployments. The 28V operating voltage ensures compatibility with 6S LiPo batteries, vehicle electrical systems, and regulated power supplies, while SMA-K connectors enable plug-and-play integration with existing RF chains. The 132 × 53 × 17 mm aluminum enclosure provides additional thermal mass and space for the integrated circulator, ensuring long-term durability.
Precision-tuned for the 6000-7200MHz spectrum, this amplifier covers critical frequencies used by Wi-Fi 6E/7 (6GHz UNII-5/6/7/8), 6GHz FPV video transmission, point-to-point microwave links, and emerging 7.2GHz wireless systems. Whether deployed in enterprise networks, drone ground stations, or experimental setups, it delivers the wideband flexibility, circulator-protected reliability, and dependable power that next-generation 6GHz applications demand.
What's in the Box
- 1 × 6000-7200MHz 40W GaN Broadband Power Amplifier with Built-in Circulator